Out of stock

Backfire ESC

$109.00 USD$98.10 USD

G2 Black / New Enclosure / 9 Pin Cable
G3 / New Enclosure / 9 Pin Cable
G3 Plus / New Enclosure / 9 Pin Cable
Zealot / New Enclosure / 9 Pin Cable
Zealot S / New Enclosure / 9 Pin Cable
Mini / No Enclosure / MR30

The ESC is HobbyWing/Backfire customized program ESC which best fit Backfire electric skateboards. Since June 2020,  Backfire updated ESC enclosure for the product lines on hand now. The ESC enclosure still fits the original deck and matches the screw holes but with some major differences:

  1. New esc enclosure works with a smaller power button than the old enclosure.
  2. New esc enclosure has a bigger heat sink plate
  3. New esc enclosure has rubber seals and back cover.  
  4. New esc enclosure has two holes for the cable to connect with the motor cables, and works with the 9 pin cables perfectly.  But if you want to use the new esc enclosure with your old esc and motor cables with MR30 plugs, you have to modify it or remove the rubber seal on the back holes to get the wires through.
  5. With the new esc enclosure and 9 pin cables, you could plug and unplug the esc and motors without take off the esc from the deck.  While with the old esc enclosure and old style motor wires with MR30 connector, you have to take off the esc enclosure from the deck before you can connect or disconnect the wires between esc and motors.



  1. Each option is special program to fit the specific model, please pay attention before placing the order.
  2. Might NOT compatible with other brands due to different programs.
  3. MR30 connector motors will not work with the new style ESC with the 9 pin connector.  People who got their boards before June 2020 all have the MR30 connectors. While people who bought their boards after June 2020 will mostly have the 9 pin connectors. Please verify before purchase.
  4. The XT60 connector to the board & battery remains the same.



Download on the App Store


Get it on Google Play



1. App Email Error

Your email address may not contain a period (.) before the @ symbol. For Gmail users, the period in your username may be omitted.

2. Can't Connect With The Board

Follow the steps below.

  1. Make sure Bluetooth on your phone is turned on and not connected with other devices.
  2. Turn on your Backfire board and remote. They should be within a few feet of each other. Only R2 and later remotes can connect with the app. G2 Black users may purchase an R2 remote to connect with the app.
  3. Double-click the triangle button on the remote. You should see "BLU ON" on the display.
  4. The remote and phone are now pairing.
  5. After pairing is complete, double-click the triangle button again to complete the process.

3. Can't Find The App On Google Play

In Google Play, search for "backfireboards". Select "New Releases" or go to the last page. Or use this link: 

Get it on Google Play