PRODUCT INFORMATION
CUSTOMER REVIEWS
PRODUCT INFORMATION



CUSTOMER REVIEWS
Alex Z.
Fast shipping easy to install
Martin P.
Paráda
Thomas J.
.
victor D v.
Motors are good. They just heat up quite a bit. Makes me a little nervous but overall not bad
Jackson H.
The same shit happened. Pins broke off inside the motor hub and I can’t get them out. The screws are a piece of shit and y’all need to fix it because I’m furious
Sergio I.
Nice
Sergio I.
Nice
Sergio I.
Nice
Braydon R.
Socket bolts break inside the hub motor plate, so you can’t get them out. Buyer Beware I made the mistake of buying extra hub motors and that didn’t fix the issue. Bolts either fall out or snap!
Malvern K.
Awful experience. Buy with care, if you have the older generation G3, this will NOT work for you. You will also be required to replace the ECS. However, once you get this it will still not be compatible as the JST connectors for the LED light don't match up. Backfire will offer you an additional kit for that at an additional cost. If you don't know all this upfront as it's not disclosed or documented anywhere it is likely that you'll have to pay the expensive shipping costs. Beware if you're an international customer as you may also get import charges. Customer support has also been awful, unresponsive and not forthcoming or knowledgeable enough to provide a complete solution in the first instance, they seem more interested in selling you more products in a piece meal fashion.
Gavin T.
I’m 150lbs so when I saw double the input on these 600w motors compared to my stock ones, I just knew I had to get them. Riding uphill has never been easier. Leaves no impact on my battery and the extra torque gives me exactly what I need to make it through tough terrain during my rides.
Blake S.
good motors
Melissa D.
They work really well.
Nicholas N.
Love it
Edward W.
One of the motors is broken. It clicks when I run it. it is a Lou’s click at a steady rhythm. I have emailed the company three times to see if i can get it replaced. I have not heard anything back. Radio silence.
Please reach out to me. Or, send me a new motor with a pre-paid return label so I can return the clicking one.
Ed. Mobile- 469-714-1630.
Sergio I.
�
Luke F.
Exactly what I needed. Thanks
Erik H.
My old hub motors were grinding and had a lot of resistance, so I purchased two new ones. Installation was not hard, and the board is back to its old self again. Make sure to tighten those screws though when putting wheels on! I lost two ;)
Rick F.
The board is very good. What a surprise. Keep up the great work!!! I recommend backfire to all skaters ..
Colin G.
I received only the motor wheels and had to contact backfire and request the front wheels and truck, which took an additional week to arrive. That being said, they did make it right at no charge to me, so I'm satisfied.
I'm impressed by how powerful these hubs are with such small wires and MR30 connectors. I made my own 5.5mm bullet to mr30 connectors (they look like little squids lol) and hooked these up to the maker-x goFOC DV6. Motor detection went smoothly with both motors coming in at just over 30A.
I still feel kinda iffy when I compare the mr30 to . . well, any other connector. Maybe upgrade the connectors to mr60 just to make them a little more finger / soldering iron friendly?
I'm sure I can do 30mph on my 12s2p P42A DIY battery.
Charles Q.
Speed baby!
Tristan J.
Backfire support has always been quick to respond to my emails. They really look out for the customer and help in any way they can. Unlike other brands they have a US warehouse meaning you get your parts faster and back riding sooner! I look forward to their future products and love my G3. If you think I'm joking just look at my odometer! 730 miles ��
Maurice H.
These motors got my board back to brand new performance
Maurice H.
Great replacement
Wayne W.
Great customer service with quick shipping. I like the plug in option for these motors although the plug section is a bit big (long). I do like the fact that I can now take off the trucks without removing the ESC case or vice versa. This is definitely a design improvement. Thank you Backfire!
Quinn D.
remember to call or email backfire to comfirm your board model and that the motor is correct. I have a gen 1 g2 black from 2019 so to replace those motors I needed to buy the g2t motors and motors covers. It can be a bit confusing but their support is top tier and very helpful!
Jesse J.
works, fixed issue
Rod D.
All was very easy to place a order and parts are always available.
Angela-Marie G.
I ordered motors just In case the ones I have now goes bad. Its always good to have extra parts on hand.
Orane E.
Great product.. worked as expected
mik r.
I really love how easy it is to switch out the motor! No removing the esc cover. Truly plug and play. It took about ten minutes and works perfectly. Not surprising though, I've never been disappointed with any purchase from backfire.
kevin S.
As new !
Anthony Z.
Love it backfire you guys really came in clutch and hooked it up when I needed it most. Above and beyond!
Kittayachon N.
Overall is nice but can improve with some details on painting. It doesn’t seem to keep well and some scratched along. Haven’t tried to used it yet, but hope it’s great!
Alex Z.
Fast shipping easy to install
Martin P.
Paráda
Thomas J.
.
victor D v.
Motors are good. They just heat up quite a bit. Makes me a little nervous but overall not bad
Jackson H.
The same shit happened. Pins broke off inside the motor hub and I can’t get them out. The screws are a piece of shit and y’all need to fix it because I’m furious
Sergio I.
Nice
Sergio I.
Nice
Sergio I.
Nice
Braydon R.
Socket bolts break inside the hub motor plate, so you can’t get them out. Buyer Beware I made the mistake of buying extra hub motors and that didn’t fix the issue. Bolts either fall out or snap!
Malvern K.
Awful experience. Buy with care, if you have the older generation G3, this will NOT work for you. You will also be required to replace the ECS. However, once you get this it will still not be compatible as the JST connectors for the LED light don't match up. Backfire will offer you an additional kit for that at an additional cost. If you don't know all this upfront as it's not disclosed or documented anywhere it is likely that you'll have to pay the expensive shipping costs. Beware if you're an international customer as you may also get import charges. Customer support has also been awful, unresponsive and not forthcoming or knowledgeable enough to provide a complete solution in the first instance, they seem more interested in selling you more products in a piece meal fashion.
Gavin T.
I’m 150lbs so when I saw double the input on these 600w motors compared to my stock ones, I just knew I had to get them. Riding uphill has never been easier. Leaves no impact on my battery and the extra torque gives me exactly what I need to make it through tough terrain during my rides.
Blake S.
good motors
Melissa D.
They work really well.
Nicholas N.
Love it
Edward W.
One of the motors is broken. It clicks when I run it. it is a Lou’s click at a steady rhythm. I have emailed the company three times to see if i can get it replaced. I have not heard anything back. Radio silence.
Please reach out to me. Or, send me a new motor with a pre-paid return label so I can return the clicking one.
Ed. Mobile- 469-714-1630.
Sergio I.
�
Luke F.
Exactly what I needed. Thanks
Erik H.
My old hub motors were grinding and had a lot of resistance, so I purchased two new ones. Installation was not hard, and the board is back to its old self again. Make sure to tighten those screws though when putting wheels on! I lost two ;)
Rick F.
The board is very good. What a surprise. Keep up the great work!!! I recommend backfire to all skaters ..
Colin G.
I received only the motor wheels and had to contact backfire and request the front wheels and truck, which took an additional week to arrive. That being said, they did make it right at no charge to me, so I'm satisfied.
I'm impressed by how powerful these hubs are with such small wires and MR30 connectors. I made my own 5.5mm bullet to mr30 connectors (they look like little squids lol) and hooked these up to the maker-x goFOC DV6. Motor detection went smoothly with both motors coming in at just over 30A.
I still feel kinda iffy when I compare the mr30 to . . well, any other connector. Maybe upgrade the connectors to mr60 just to make them a little more finger / soldering iron friendly?
I'm sure I can do 30mph on my 12s2p P42A DIY battery.
Charles Q.
Speed baby!
Tristan J.
Backfire support has always been quick to respond to my emails. They really look out for the customer and help in any way they can. Unlike other brands they have a US warehouse meaning you get your parts faster and back riding sooner! I look forward to their future products and love my G3. If you think I'm joking just look at my odometer! 730 miles ��
Maurice H.
These motors got my board back to brand new performance
Maurice H.
Great replacement
Wayne W.
Great customer service with quick shipping. I like the plug in option for these motors although the plug section is a bit big (long). I do like the fact that I can now take off the trucks without removing the ESC case or vice versa. This is definitely a design improvement. Thank you Backfire!
Quinn D.
remember to call or email backfire to comfirm your board model and that the motor is correct. I have a gen 1 g2 black from 2019 so to replace those motors I needed to buy the g2t motors and motors covers. It can be a bit confusing but their support is top tier and very helpful!
Jesse J.
works, fixed issue
Rod D.
All was very easy to place a order and parts are always available.
Angela-Marie G.
I ordered motors just In case the ones I have now goes bad. Its always good to have extra parts on hand.
Orane E.
Great product.. worked as expected
mik r.
I really love how easy it is to switch out the motor! No removing the esc cover. Truly plug and play. It took about ten minutes and works perfectly. Not surprising though, I've never been disappointed with any purchase from backfire.
kevin S.
As new !
Anthony Z.
Love it backfire you guys really came in clutch and hooked it up when I needed it most. Above and beyond!
Kittayachon N.
Overall is nice but can improve with some details on painting. It doesn’t seem to keep well and some scratched along. Haven’t tried to used it yet, but hope it’s great!